Build log date: Saturday, November 01, 2003
-
The vent openings are fabricated.
-
Did a bit of riveting.
-
Drilled the landing gear to the bracket per plans. Had to borrow the neighbor's 3/8" chuck drill.
-
Installed and match drilled the brake flanges.
-
Drilled the first hole in the flap brackets. The other hole is match drilled in the fuse.
-
Placed a bit of aluminum screen on the vent openings with some JB weld. Per plans.
-
Drilling lightening holes in the seat back braces.
-
Deburring the braces.
Previous Top Next